 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|
| KA3511CS | 40 | ≤300 | 200 | 48 | 24-SDIP | Dual complementary PWM signal, open drain output, fixed-frequency pulse width modulation circuit improved properties with 5V reference voltage, overvoltage, undervoltage protection, deadband control, remote control and other functions |
| KA3524 | 40 | ≥350 | 100 | 45 | 16-DIP | Dual complementary PWM signal, open-drain output, the quiescent current of less than 10mA, 50mA output current has 5V reference voltage shutdown protection. Alternative Model SG3524 |
| KA3525A | 40 | ≥400 | 500 | 49 | 16-DIP | Dual complementary PWM signal, totem pole output, the reference voltage 5V ± 1% ,, integrated soft-start, deadband control, undervoltage lock protection. Alternative models SG3525A |
| KA3842B KA3843B |
30 | ≤500 | 1000 | 100 | 8-DIP 14-SOP |
Single PWM, totem pole output. Start KA3842B 16V, 10V off; KA3843B 8.5V start, 7.9V shutdown. Alternative UC3842B, UC3843B |
| KA3844B KA3845B |
30 | ≤500 | 1000 | 50 | 8-DIP 14-SOP |
Single PWM, totem pole output. Start KA3844B 16V, 10V off; KA3845B 8.5V start, 7.9V shutdown. Alternative UC3844B, UC3845 |
| KA3843AC | 30 | ≤500 | 1000 | 100 | 8-DIP 8-SOP |
Programmable Pulse by Pulse Current Limiting; Configuration; Double Pulse Suppression; 200mA Totem-Pole Outputs; 2% Band gap Reference; Under Voltage Lockout; Soft-Start Capability; etc |
| KA3846 | 40 | ≤500 | 500 | 50 | 16-DIP | Low Start Current 0.2mA (Typ); Operating Range Up To 500kHz; Cycle by Cycle Current Limiting; Under Voltage Lock Out With Hysteresis; Short Shutdown Delay Time: Typ.100ns; High Current Totem-Pole Output |
| KA3882C KA3883C |
30 | ≤500 | 1000 | 100 | 8-DIP 8-SOP |
Low Start Current 0.2mA (Typ); Operating Range Up To 500kHz; Cycle by Cycle Current Limiting; Under Voltage Lock Out With Hysteresis; Short Shutdown Delay Time: Typ.100ns; High Current Totem-Pole Output |
| KA7500C | 42 | ≤200 | 250 | ≥45 | 16-DIP 16-SOP |
Internal Regulator Provides a Stable 5V Reference Supply; Trimmed to 1% Accuracy; Output Control for Push-Pull or Single-Ended Operation; On-Chip Oscillator With Master or Slave Operation; etc |
| FAN7554 | 30 | ≤500 | 1000 | ≥98 | 8-DIP 8-SOP |
Soft start; On/off control; Over load protection; Over voltage protection; Over current protection; Over current limit; Operating frequency up to 500kHz; 1A totem-pole output current; etc |
| KA7552A | 30 | ≤600 | 1500 | 74 | 8-DIP | Built-in drive circuits for direct connection power MOSFET (lO = ±1.5A); Wide operating frequency range (5kHz ~ 600kHz); Pulse by pulse over current limiting; Over load protection; On/off control by external trigger; Internal UVLO; Low standby current (typ. 90uA); Soft start circuit |
| KA7553A | 30 | ≤600 | 1500 | ≥49 | 8-DIP | |
| FAN100 | 30 | ≤45 | ≤5 | 75 | SOP-8 | Primary side PWM chip adjustment |
| FAN102 | 30 | ≤45 | ≤5 | 75 | SOP-8 | |
| FAN103 | 30 | ≤53 | ≤5 | 80 | SOP-8 | By-pulse current limiting, constant voltage, constant current control PWM low-power chip |
| FSEZ1016A | 30 | ≤46 | 1000 | 75 | SOIC-7 | Integrated primary side MOSFET PWM chip adjustment |
| FSEZ1216 | 30 | ≤45 | 1000 | 75 | DIP-8 | |
| FSEZ1307 | 30 | ≤53 | 500 | 80 | SOP-7 | The third generation of integrated primary-side MOSFET PWM chip adjustment, help to improve the performance of low-power flyback converters |
| FSEZ1317 | 30 | ≤53 | 1000 | 80 | SOP-7 | |
 |
||||||
